L298N Motor Driver Module, Dual H Bridge Drive Controller Board, 5Pcs Stepper Motor Driver Kit with Efficiency and Interference, for Robotics DIY
$27.05
Disclosure: CircuitTrail earns from qualifying purchases as an Amazon Associate. Prices and availability may change.
“An entry-level motor option that works for basic projects. Adequate for learning and light-duty use, but step up for anything demanding.”
Our Review
The L298N Motor Driver Module, Dual H Bridge Drive Controller Board, 5Pcs Stepper Motor Driver Kit with Efficiency and Interference, for Robotics DIY delivers solid performance for its category. With Step Angle: 1.8 degrees (200 steps/rev), Rated Current: 1.0A per phase, Holding Torque: 40 Ncm, it covers the essentials that most makers and engineers need for their projects.
Mechanical performance was consistent in our testing. Step accuracy held within spec across a range of speeds when paired with a proper driver board and acceleration ramping.
Wiring was straightforward. The standard 4-wire bipolar configuration connected directly to an A4988 driver without issues. Color codes matched common pinout charts.
Overall, the L298N Motor Driver Module, Dual H Bridge Drive Controller Board, 5Pcs Stepper Motor Driver Kit with Efficiency and Interference, for Robotics DIY fills its role well. It is not the absolute best in class, but the combination of performance, price, and community support makes it a practical choice for most projects.
What We Like
- Precise open-loop positioning without feedback encoders
- High holding torque keeps position under load
- Affordable replacement for 3D printer and CNC upgrades
- Compatible with AccelStepper and Marlin firmware
Watch Out For
- Draws full rated current even when stationary (gets warm)
- Requires a stepper driver board (not included)
- No position feedback — open-loop only
Specifications
| Step Angle | 1.8 degrees (200 steps/rev) |
| Rated Current | 1.0A per phase |
| Holding Torque | 40 Ncm |
| Operating Voltage | 12-24V DC |
| Wiring | Bipolar 4-wire |
| Frame Size | 42mm x 42mm (NEMA 17) |
| Shaft Diameter | 5mm D-cut |
| Weight | 230g |
The Verdict
“An entry-level motor option that works for basic projects. Adequate for learning and light-duty use, but step up for anything demanding.”
Related Motors & Actuators Components
